Harness & Safety belt & Reflective Safety Vest


INSTRUCTION RND MAINTENANCE FOR SAFETY HARNESS

  • Take the harness by the D ring attached to the life rope.

  • Slip on the shoulder straps one after the other, taking care not to twist them. Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks. Pull one and the other thigh strap or the waist strap and adjust its tension to hold the shoulder straps centered on each shoulder

  • For your safety and comfort in use, the harness has to be correctly adjusted-neither too loose nor too tight.

  • Before each use, a close examination should be made of the straps, rope and fittings to make sure that the harness is in perfect working order

  • Whenever possible, it is strongly recommended that the harness be assigned to an individual in order to limit the re-adjustments needed when the harness changes hands

  • Any harness that has withstood a fall or which appears doubtful on visual examination must immedjiately be withdrawn from service.

  • The harness must be examined at least once a year by a competent person authorized by the manufacturer

  • Stained belt should be washed with detergent and dried under indirect sun

  • The equipment should be looked after and kept in a cool dry place free from direct sunlight.
    		•
    		INSTRUCTION AND MAINTENANCE FOR SAFETY BELT

  • When you fasten the belt, set the buckle correctly and D rings position on rear side of the waist.

  • The hook led to safety belt should be hung as high position as possible.

  • The life rope should not be tied any of sharp angled object.

  • Do not use the life rope to support yourself.

  • Do not use teg safety belt which has once been damaged with impact, even if no difference in its out looking is recognized.

  • Any of safety belts, having the following defects, should not be used.

    • A. Insufficient operation of safety cover of the hook;
    B. Insufficient operation of the buckle's lock;
    C. Worn out life rope;
    D. Kinked life rope;
    E. Worn out threads on the stitched part on the belt;
    F. Deformed or cracked harm;
  • The following maintenances are recommended.

    • A. Stained belt should be washed with detergent and dried and dried under indirect sun;
    B. Lubrication to safety harmless, especially its rotating or defacement part, should be done once or twice a month with spindle oil or something alike;
    C. Do not keep the safety belt with sand.

    ITEM
    Model

    Model:TXS2
    TXS2-3
    TXS2-5
    TXS2-7
    TXS2-10
    TXS2-15
    TXS2-20
    TXS2-30
    Range of action(m)
    3
    5
    7
    10
    15
    20
    30
    Critcal locking speed (m/s)
    1.0
    Maximum working load(kg)
    150
    Locking distance (m)
    ≤0.2
    Whole set break load(N)
    ≥13500
    Service life (time of use)
    2*10
    Lock device
    Double lock

    Herness with working vest
    Model:HV1

    Harness assembly
    Different assembalage si available
    Min.order:200sets/model
    Model w×H(cm) Dress Material & reflective Material
    D01T26 60×60 Led、Tennis Fabric Oxford FluoFabric & Reflective Crystal
    D01J01 48×60 Oxford Fluo Fabric &Reflective Crystal
    D01J02 48×60 Tennis Fabric &Reflective Crystal
    D01J05 48×62 Oxford Fluo Fabric &Reflective Crystal
    D01T01 58×60 Knitting Fluo Fabric &Reflective Fabric
    D01T02 58×60 Warp Knitting Fluo Fabric &Reflective Fabric
    D01T04 58×60 Knitting Fluo Fabric &Reflective Fabric
    D01T05 52×58 Tennis Fabric &Reflective Crystal