High speed rolling door

The high speed rolling door is designet for industrial environment which is with intensive material flow,requiring high speed and safety.

Model:HS-HSRD

Motor:3F/380,0.55-1.5KW,IP55,50Hz

Opening-closing speed of 0.7 to 1.2m/sec.

Max size W5000mm x H6000mm

Door leaf:1.0mm high density polyester fiber or 1.5mm transparent PVC soft sheets made in France.

The photocell safety switch is a set of correiation infrared device in stalled under the door track
When the rolling door is closing,if a person or an object blocks the correlation infrared,the door will rise to the reverse direction.

For the additional safety the bottom edge safet is an optional safety device.If the door is closing,slight collision between the bottom edge and any object will open it to the opposite direction.

Sectional overhead door

  
Model:HS-ODH

Adopt process-taminated in a high level insulating polyurethane freon free chemical process under continual porduct line.The surface of both side id high quality Baosteel steel sheet,PVDF coating which could resist long-term shine,rain and ultraviolet radiation.It would not be faded winthin 15 years.The advantage is as follows:strong mucosity,good insulation(K≤0.5w/㎡.℃），no foam,density≥40Kg,working temperature span(-20℃ - 90℃),without air gap.The thickness of the door panel is fire0proof is B1.Extemal torsion spring balancing system,with a minimum life cycles of 30000.

Alum. wheel bracket.Stainless steel hinge.

The bottom seating is ¤shape vinyl resin sealing strip in the base ante freezing,damp proof and water resistant.The top and both sides are sealed with trough sealing strips.Panel and panel are also sealed.

Operation speed is 250mm/s

Windload of door panel:50Kg/㎡