Home > What do you need to know — buy electric chain hoist

What do you need to know — buy electric chain hoist

  • liftool_admin
  • 28 Dec 2023

Selecting a perfect Electric Chain Hoist 2 Ton for the project is not as simple as it might appear. There are various considerations to think about before your boss places an order. But before that, your senior should know all the pros and cons of this machine. To make sure you are ready for this, we have put together a guide. Here you will find the most suitable answers to the questions your boss might ask you while buying the Electric Chain Hoist. Your employer can ask:

Do we understand and know what the Constant Amps and Voltage is Necessary for an Electric Hoist?

It is one of the most common questions to solve when you consider buying an electric hoist. You cannot have amp or voltage draws while implementing these products in your project. Thus ensure that the job site where you will be working should provide that consistency. In this way, the electric hoist can operate in perfect order.

What is the minimum gauge electric hoist will need according to their extension cord?

The thinner is the gauge cord, the thicker the cord will become. It will allow you to carry the intended voltage for the 460 volts electric chain hoist to ensure it includes enough power. The further the electric hoist is away from the power source, the shorter the extension cord and gauge you can find. For instance, if your project has 20 amperes with 110 volts, you will only need a 14 feet gauge and 25 feet cord.

Are we implementing angular pull? If yes, is there any necessity to enhance the needed capability for the lift?

Through angular pull, an electric hoist is used for inline loading or you will remain 90 degrees off. It will happen regardless of the fact if the Electric Chain Hoist 5 Ton is rigging or sling. Once you let go of that 90 degrees and include any angular pull, it enhances and induces the tension passing through the hoist. For a 1 ton electric hoist, you can use an inclination angle of 60 degrees. Thus always ensure if you are implementing an electric hoist at an angle, you should have the correct capacity in the first place.

Are we sure that the rigging and structure are perfect for our application?

If an Electric Chain Hoist 230 Volts gets placed in any beam type, you should consider the different force types applied here. For example, while using an electric hoist of 1-ton weight, the beam should hold that weight correctly. Check the beam or any other structure where you will be going to hoist the machine, should possess integrity and is sturdy enough to hold it.

Is 25% of the duty cycle enough for an electric cycle, or should we consider another type of hoist?

A 25% duty cycle will keep the electric hoist from overheating. In this case, the electric hoist will run for 15 minutes and then automatically shut itself down. So make sure your project has this type of electric hoist with an enhanced duty cycle.


So these are some questions your boss might want to know before investing in an electric hoist for the project. We hope you can now give the correct answers whenever your senior asks you one of the above questions.