Electric Chain Hoist HHBD-III
- Shell: Light aluminum alloy shell shall be adopted which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
- Inverse phase sequence protecting device: It is the special electrical installation which control the circuit not to work in case of wiring error in the power supply.
- Limit switch:The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
- 24V/36V device: it is used to prohibit the emergencies from occurring in case of the leakage in the switch.
- Side magnetic braking device: This device shall realize the instant brake in case of the power dump.
- Chain bag: It shall be light, handsome and durable.
- Chain:The chain shall adopt the imported FEC80 ultra heat-treatable aluminum alloy chain.
- Shell: Light aluminum alloy shell shall be adopted which is light but hard and fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
- Inverse phase sequence protecting device: It is the special electrical installation which control the circuit not to work in case of wiring error in the power supply.
- Limit switch:The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.
- 24V/36V device: it is used to prohibit the emergencies from occurring in case of the leakage in the switch.
- Side magnetic braking device: This device shall realize the instant brake in case of the power dump.
- Chain bag: It shall be light, handsome and durable.
- Chain:The chain shall adopt the imported FEC80 ultra heat-treatable aluminum alloy chain.
You May Also Like
You May Also Like
Product parameter
Without electric trolley
Model
Capacity
(kg)
Standard lifting height
(m)
Operating
cable:L(m)
Lifting motor 3 phase
Lifting speed
(M/min)*(two speeds) 50/60Hz
Load
chain
Class
ISO/FEM
Test
load
Net
weight
(kg)
Weight to be added for every 1m increase
in lift (kg)
Output
power
(kw)
Repeated
rating
(%ED)
High
speed
Low speed
Diameter x number (mm)
HHBD-III0.125
125
4
3.5
0.75
40/20
30
10
5.6×1
M5/4m
156kg
33
0.71
HHBD-III0.25
250
4
3.5
0.75
40/20
15
5
5.6×1
M5/4m
313kg
33
0.71
HHBD-III0.5
500
4
3.5
0.75
40/20
7.8
2.6
5.6×1
M5/4m
625kg
33
0.71
Model
Capacity
(kg)
Minimum inter hook Distance: C
D
a
b
d
e
f
g
h
i
HHBD-III0.125
125
410
485
417
367
230
187
298
27
137
128
HHBD-III0.25
250
410
485
417
367
230
187
298
27
137
128
HHBD-III0.5
500
410
485
417
367
230
187
298
27
137
128
Product parameter
Without electric trolley
| Model | Capacity (kg) |
Standard lifting height (m) |
Operating cable:L(m) |
Lifting motor 3 phase | Lifting speed (M/min)*(two speeds) 50/60Hz |
Load chain |
Class ISO/FEM |
Test load |
Net weight (kg) |
Weight to be added for every 1m increase in lift (kg) |
||
| Output power (kw) |
Repeated rating (%ED) |
High speed |
Low speed | Diameter x number (mm) | ||||||||
| HHBD-III0.125 | 125 | 4 | 3.5 | 0.75 | 40/20 | 30 | 10 | 5.6×1 | M5/4m | 156kg | 33 | 0.71 |
| HHBD-III0.25 | 250 | 4 | 3.5 | 0.75 | 40/20 | 15 | 5 | 5.6×1 | M5/4m | 313kg | 33 | 0.71 |
| HHBD-III0.5 | 500 | 4 | 3.5 | 0.75 | 40/20 | 7.8 | 2.6 | 5.6×1 | M5/4m | 625kg | 33 | 0.71 |
| Model | Capacity (kg) |
Minimum inter hook Distance: C | D | a | b | d | e | f | g | h | i |
| HHBD-III0.125 | 125 | 410 | 485 | 417 | 367 | 230 | 187 | 298 | 27 | 137 | 128 |
| HHBD-III0.25 | 250 | 410 | 485 | 417 | 367 | 230 | 187 | 298 | 27 | 137 | 128 |
| HHBD-III0.5 | 500 | 410 | 485 | 417 | 367 | 230 | 187 | 298 | 27 | 137 | 128 |
